Close Menu

Thermal Transfer Centrifugal Pumps

Thermal

Shanley Pump and Equipment, Inc. is your Thermal Oil Transfer Centrifugal pumping solution with our line of high strength and temperature resistant *Allweiler®, Speck, and Iron Duke Centrifugal Thermal Oil Transfer Pumps.

Shanley Pump and Equipment carries a full line of *Allweiler® NTT series thermal oil pumps ready for immediate delivery. These are horizontal centrifugal pumps that are capable of pumping thermal oil at 660° degrees F (350°C) and require no additional coiling. Shanley Pump and Equipment holds current in-house stock of NTT pumps with nodular (ductile) cast iron casings.

We also carry a full line of the Speck® Thermal Oil Pumps for Hot Oil transfer applications. Speck Pumps are available in either mechanical or seal less mag-drive design and can be either vertically or horizontally mounted depending upon your installation requirements.

The NTT series pumps have 150 pound raised face flanges while the Speck unit comes standard with ANSI (A.N.S.I.) American National Standards Institute Drilled Flanges and both are available for immediate delivery. Contact a Shanley Pump and Equipment, Inc. representative today at 847-439-9200 or email us, We look forward to your questions.

*Allweiler® NTT Series Centrifugal Pump

The *Allweiler® NTT series Centrifugal pump for heat transfer oils is an ideal solution for the handling of organic heat-transfer oils in heat-transfer plants from 0-6400 GPM at temperatures up to 660°F up to 475 feet of head. The NTT's unique design eliminates the need for cooling due to its self-cooling design characteristics over any operational temperature range during operation.The NTT series advantages for the pumping of heat-transfer oils are numerous, but here are just a few:

*
:

Leave this empty:

*Cookies must be enabbled to submit this form

Speck Thermal Oil Pumps

Speck Centrifugal pumps are designed for the transport and recirculation of organic heat transfer oils on mineral and/or synthetic basis as well as heat transfer applications throughout the world from 0-880 GPM at temperatures up to 620°F with up to 1075 feet of head.

The robust design and construction of Speck thermal fluid pumps is due to a rigorous quality control system that begins at their manufacturing facilities where ISO: 9001 requirements met throughout the entire manufacturing process resulting in a superior hot oil transfer pump.

The Speck pump design allows handling of heated mineral and synthetic oils in heat transfer plants effortlessly. The pumped fluids must not chemically attack the pump materials nor contain any abrasive particles in suspension or damage to the pump may occur.

Iron Duke Pumps

Iron Duke Pump lines from Shanley Pump and Equipment incorporate all the best features from other leading manufacturers without the leading manufacturer price bringing you the best of both worlds, performance and affordability with our flagship Series of centrifugal pumps for difficult pumping applications, Citadel and Centurion!

The Centurion series of 22 different centrifugal thermal fluid pumps represent a highly effective, low-costing self-cooling centrifugal pump for thermal transfer fluids such oils and other thermoconductive pumping media. The Centurion Series operates at typical production flow ranges up to 1,600 GPM at head presures up to 550 feet TDH (Total Dynamic head) with a maximum operational temperature of 660°F under its air-cooled design.

The Citadel series of 20 Centrifugal Chemical Process Pumps are designed to be a highly economical specialized centrifugal pumping soultion up to 1,700 GPM for difficult pumping applications involving caustic and corrosive chemicals that would attack standard centrifugal pumps.

Thermal Transfer Icons

Applications for the Speck Thermal Oil Pump include but are not limited to:

Thermal Industry Illustration

If you have any questions about our services, please feel free to call us or send us an email! We look forward to hearing from you.

*Shanley Pump Group is not affiliated with nor distributor for Seepex®, Allweiler®, Moyno®, Tarby®, Netzsch®, or Continental Inc.® All referenced product names, brands, models, or part numbers is solely for identification purposes. Seepex® is a registered trademark of Seepex®. Moyno® and Tarby® are registered trademarks of Robins and Myers® and NOV®, Netzsch® Incorporated is a registered trademark of the Netzsch® Group, Allweiler® is a registered trademark of Colfax® Corporations Continental® Pumps is a Trademark of Continental® Ultra Pumps.